Skip to main content

How to configure the Break option for drivers

This article explains how to use the Break option to define time periods when a driver is not available to receive assignments.

Written by Joao Lucio

What is the Break option used for?

The Break option allows you to set specific time ranges during which a driver will be unavailable. This is useful for:

  • Meal breaks

  • Mandatory rest periods

  • Any planned downtime when the driver should not operate

Where can I configure a driver break?

Breaks are configured per driver in the Drivers module.

Step-by-step

  1. Go to the Drivers module.

  2. Click on Settings and enable the Break settings option

  3. In the Vehicles section, find the driver you want to set up.

  4. Double-click on the conductor to open its details.

  5. Scroll to the Break section.

  6. Set:

    • Start time of the break

    • End time of the break

    • Duration (minutes), if applicable

  7. Save your changes.

📌 As shown in the image, the break is defined by selecting a specific time range.

What happens during a break?

  • The driver will not be available for assignments during the configured break time.

  • No services will be assigned to the driver while the break is active.

Important notes

  • You can edit or remove a break at any time from the driver’s profile.

  • Make sure the break schedule does not overlap with critical operations.

If you have any questions about this feature, please contact our support team.

Did this answer your question?